01

Why one tap or every tap can lose hot water

One cold tap or shower while others work normally points towards that outlet or its local supply or mixing arrangement. If all hot taps stay cold, the shared source of hot water needs attention: the combi boiler or a cylinder and its controls. Water that flows but stays cold is also different from losing water flow itself. The repair should address the affected part of that system.

02

How your boiler supplies hot water

A combi normally heats tap water on demand. A system or regular boiler may heat stored water in a cylinder, with separate controls influencing when it is heated. Include any cylinder or secondary heat source you know about. The boiler and the hot-water store do not always share the same fault.

03

What can stop the boiler supplying hot water?

On a combi, a fault in demand sensing, switching between heating and hot water, or heat transfer can prevent hot water reaching the taps. With a cylinder, the heating schedule, thermostat or valve can interrupt reheating even while radiators still work. The repairer checks the relevant demand and heat path before recommending a part. Working heating alone does not prove that a diverter valve has failed.

04

Prepare details for a hot water repair

Give the boiler model, affected taps and the last time hot water worked normally. Explain whether a cylinder has already been heated or a schedule changed, if known. Clarify whether the proposed work covers the boiler, controls or stored-water system, because different equipment may require different expertise.

REPAIR QUESTIONS

Hot water failure questions

Why can my heating work when hot water does not?

The two services can fail independently. Mention whether the taps never warm up or warm briefly then cool; those are different patterns despite working radiators.

Is a single cold tap likely to need a boiler repair?

Usually a local tap or mixing issue is more likely when every other hot outlet works. Identify the affected fitting so the enquiry reaches someone who covers that work.

Can a cylinder-system fault be separate from the boiler?

Yes. A working boiler does not confirm that the cylinder is reheating. Tell the repairer about any separate immersion heater, as hot water from it can mask a boiler-fed cylinder problem.