01

Why a combi can heat radiators but leave taps cold

A combi uses different demand signals and operating conditions for heating and tap hot water. A problem with hot-water detection, switching or heat transfer can therefore leave heating working. If both services fail, a shared supply, control or appliance fault becomes relevant. The repairer checks the affected function and its sequence before recommending a part; heating without hot water does not prove a diverter-valve fault.

02

Why combi hot water changes when taps are used

A combi heats water as it flows, so simultaneous outlets share the available flow and heating capacity. A change only when several taps run may differ from temperature swings at one outlet during otherwise normal demand. A shower-only issue can also involve local mixing controls. Assessment should separate demand limitations from a fault before a repair or appliance change is proposed.

03

What a combi boiler assessment covers

Assessment may follow demand detection, controls, water movement and heat transfer, depending on the model. A diverter-valve issue is one possible cause of poor switching between functions, but it is not established just because one function works. Ask how the findings support the recommended repair.

04

Repair choices for your combi model

Include the model, approximate age if known, warranty information and previous work. Parts availability and overall condition can affect the proposal. Compare the diagnosed repair with any alternative on its actual scope and cost, rather than assuming that every older combi must be replaced.

REPAIR QUESTIONS

Combi repair questions

Can a combi produce heating but no hot water?

Yes. Include whether all taps are affected and whether the boiler responds when a hot tap opens. That observation is useful without naming a suspected component.

Does changing tap temperature prove a particular component has failed?

No. A temperature change is a symptom, not a parts diagnosis. Note whether it happens at one outlet or across the property before agreeing a named component replacement.

What information helps with an older combi?

The full model, previous repair invoices and any current cover are useful. If a part is proposed, ask whether availability has actually been checked rather than inferred from the boiler's age.