What an unsuccessful ignition attempt means
An attempted start without sustained firing means the appliance has not completed its normal starting sequence. Clicking, a brief attempt followed by shutdown and a displayed lockout describe different stages but do not establish the failed component. Ignition, flame detection and the conditions needed before firing must be distinguished. Do not repeatedly restart the boiler or remove its casing to watch the internal sequence.
Distinguish ignition from flame detection faults
Ignition starts combustion, while flame detection confirms a condition the control system needs to recognise. The relevant components and sequence differ between models and fuels. A message referring to either function is useful information, but does not by itself prove which part needs repair.
Check other causes of failed ignition
Fuel supply, airflow and electronic control can affect the start sequence too. Assessment should distinguish those areas from a fault in an ignition or sensing component. Ask how the findings support the recommended work instead of treating a code description as a parts order.
Agree the ignition repair scope
Provide the full boiler model and fuel, plus any previous repair report. Clarify the component proposed, its compatibility and checks after the work. Oil-fired enquiries must identify that fuel from the outset, since gas-appliance diagnosis and component names cannot simply be applied to an oil burner.
REPAIR QUESTIONS
Ignition fault questions
Does clicking without firing prove an electrode fault?
No. Clicking does not establish why firing failed. A safe external recording may help preserve the sequence, but repeated attempts to obtain one are unnecessary.
Is flame detection the same as ignition?
No. Ignition starts combustion; flame detection confirms it to the controls. Ask the repair report to distinguish them, as "ignition repair" can otherwise conceal different component work.
Can an ignition message be caused by something outside the ignition component?
Yes. Supply, airflow or control conditions can interrupt firing. Keep the message exactly as displayed rather than replacing it with an assumed electrode or igniter diagnosis.